|
Only ZONEFIRST offers simple, easy-to-wire zone control panels that eliminate the time to screw in every wire from the damper motor and thermostat. Our NEW Color Coded Push-In terminals helps every installer easily see where each thermostat Y-G-R-W and C, if used, wire should go. The push-in terminals make it easy to insert each wire quickly and easily. The quick release button also makes removing the wires easier and less time consuming than screwing and unscrewing each wire.
Our NEW Plug-In Damper Motors use a modular plug cord or telephone wire, to simply plug-in each damper. The NEW DC powered motor uses much less power and current than 24VAC motors, which is another savings, and has a built-in two color LED to indicate when the damper is Open (Green) and Closed (Red). Each damper also includes a 25 foot modular cord and splitter. The splitter allows slaving up to 10 additional dampers on the same zone. Also ZONEFIRST is the only one to give you the wire for the dampers . . . another advantage and cost savings.
ZONEFIRST's New Plug-in Zone Dampers and Controls with Color Coded Push-in Wiring Blocks is so easy and so FAST, you'll be done in a SNAP. There's not another system out there that's Easier, Faster and Simpler.
- Worlds easiest Zoning System to install
- Least expensive Zoning system
- Unlimited amount of zones available by adding zone expansion panels.
- The only Zoning system with plug-in 12-volt DC dampers
- Uses any style thermostat
- Push-in terminals with color coded wiring blocks Plug-In dampers (4 wire phone cord)
- 25' phone cord included with damper
- Intergraded lights let you know if damper is open/closed
- Up to ten dampers wired in series
- Supply Damper sizes from 4" - 20"
- 50 Years of Zoning Experience
|
